Direct import from European stocks — no middlemen · 10 partner stocks · −30 to −50 % vs retailFRENDENLESIT
Installation & advice Blog Showroom Made to measure Customer stories Trade area →

Which plasterboard to choose? Standard, moisture-resistant, acoustic…

Standard grey, green moisture-resistant, blue acoustic, high-impact: the table to pick the right board for each room and use.

Plaques de plâtre standard hydrofuge et phonique comparées

From a distance all plasterboards look alike — up close, each has a precise job. Picking the wrong one means a crumbling wall in a wet room or a partition that lets every sound through. The two-minute summary.

The selection table

Board Recognisable by Use
Standard 12.5 mm Grey liner Partitions and ceilings in dry rooms
Moisture-resistant Green liner Bathroom, kitchen, WC — mandatory in wet rooms
Acoustic Blue liner, high-density core +3 dB over standard: bedrooms, party walls
High-impact Reinforced yellow or white liner Hallways, garages, heavy loads (up to 60 kg/point)
Fire-rated Pink liner Boiler rooms, attached garages, ducts
18 / 25 mm boards 18 or 25 mm thick Tall walls, higher acoustic or fire requirements

The cross-section of a board

paper liner (the tensile strength)gypsum core (12.5 mm on a standard board)paper liner — the part you must never pierce when screwingtapered edges for the tape

The 3 reflexes

  • Wet room = moisture-resistant minimum, ceiling included.
  • Party wall or child's bedroom = acoustic board, it costs 2 € more per m².
  • The 900 mm wide format exists: easier to handle up a narrow staircase.

Full installation is in our guide to building a plasterboard partition, and finishing in joint tape.

Leave a Reply

Your email address will not be published. Required fields are marked *

Do you want to check stock availability?
Instant reply on WhatsApp.
Check on WhatsAppCall us